Remote Status Unit Flush Mounting
Power requirements: 21-28VDC (200mA electronic fuse).
Quiescent current: 7mA.
Auxiliary inputs: Three: (1) Hold; (2) Abort; (3) Mode. A 6k8 EOL resistor must be fitted across the terminals of the last device on each monitored input circuit. Unused circuits must have the 6k8 resistor fitted at the terminals.
Indicators: Gen. fire; Fire Zones (x3); Gen. disablement; Hold; 1st Stage Output; 2nd Stage
Output; Release Imminent (x2); Extinguishant Released; Abort; Gen. Fault; Man. Only; Man/Auto.
Controls: Extinguishant release (housed in yellow casing); Operation keyswitch (Manual only or Manual & Auto).
Product dimensions(mm): 175 W x 250 H x 70 D mm. Hole required for flush mounting 156 W x 232 H x 51 D mm.
Construction & finish: Metal.
IP Rating: IP30.
Weight: 1.338kg..
Operating conditions/temperature: -5ºC to +40ºC. Max relative humidity: 95%.
Network specification: RS485; Max. 8 remote status units (any mix) per EP203; Four wire connection (2 power, 2 data); Daisy-chain wiring.
