Addressable Button
Indicators
2 pcs LED indicators are available on button as mentioned
below:
Fire Alarm Led: Red color. It flashes during question button address when it communicates with panel. In alarm condition,LED illuminates permanently.
Fault Led: Yellow color. In short circuit condition LED illuminates permanently. LED turns off When the short circuit condition disappear. (This LED is only available in short circuit isolator models)
Power Supply: | 18-33V DC Loop Powered |
Quiescent / Alarm Current: | 350µA / 700µA |
IP Protection Class: | IP22D |
Operating Temperature: | (-10°C) - (+55°C) |
Storage Temperature: | (-30°C) - (+60°C) |
Relative Humidity: | %0-95 |
Weigth: | 150 gr |
Dimensions (LxWxD): | 87 x 91 x 58 mm |
Color: | Red |
Cable: | 1x2x0,8+0,8JH(st)H / |
Maximum Supply Voltage (Vmax) | 33V |
Nominal Supply Voltage (Vnom) | 26V |
Minimum Supply Voltage (Vmin) | 18V |
Maximum Operating Current (ICmax) | 1A |
Maximum Switching Current (ISmax) | 1A |
Case of Short Circuit Rated Current (ILmax) | <45mA |
Maximum Contact Resistance (ZCmax) | 500mΩ |
Isolating Voltage (VSOmin - VSOmax) | 8V - 13V |
Reconnect Voltage (VSCmin-VSCmax) | 8V - 13V |
• Produced by use of surface mount technology
• Compatible with Maxlogic intelligent addressable fire alarm control panel
• Compatible with surface mount
• Loop-powered
• ‘Soft’ addressable by use of address programmer
• Microprocessor controlled
• User friendly
• IP22D protection class
• Optional transparent protection cover
• Easily resettable
• High and stable operation performance
• Contains short circuit isolator
• Communication interrupt for fast fire alarm detection in 1.5 sec
